OEM Audio Plus


High-Fidelity Sound | Plug-and-Play Installation 



  • High-resolution clarity, loudness, and impact.
  • True Plug-and-Play Installation
  • Engineered and tuned specifically for the Jeep Wrangler
  • Vehicle factory warranty remains completely intact
  • Guaranteed results

Signature Edition for the Jeep Wrangler

Decades of audio engineering expertise have equipped our team to deliver a package that truly delivers high fidelity sound unlike anything in the aftermarket that is pieced together. All components found in the Signature Edition are O.E. grade - Which means they are reliable, fit perfectly, and require no modifications to your vehicle. No aspect of the System is "off-the-shelf."  The system components are tailored specifically to each other and the vehicle. Leaving no guesswork.

We are proud to offer a Sound Solution that integrates seamlessly with the factory electronics, provides next-level clarity, dynamics, and loudness. Most manufacturers build products for themselves. On the contrary, it is our relentless commitment to create Solutions made specifically for the Jeep and Jeep owner.

It sounds unbelievable. Really what I was impressed with was the placement of the front stage. The vocals and the strings can clearly be pulled out of the music.

Sean Hollman

Motor Trend

The staging was amazing! It is all in front of you.  It sounded amazing and I didn't hear the interior rattle at any point even at max volume. 

Jay “Lightning” Tilles

The Truck Show Podcast

The imaging is on point.  It sounds really good. You can blast it all the way and it sounds crisp and clean, and then you can have it at a lower setting and it's just super clear.

AJ Van De Water


It was crisp, clear, and no dropouts at all. I am super impressed with it. 

Cody Sisson

Trailchasers Podcast

Amplification Package

Next-level sound reproduction. No trade-offs.

The Signature Edition brings a whole new class of sonic performance to the Jeep. Thanks to our advanced amplification, the built-in 64-bit Digital Signal Processing power, and zero-compromise operation accomplished by the Integration Interface Module — the Signature Edition delivers double the power of the factory system and more performance than any of our other offerings. So whether you’re listening to a podcast or your favorite album, you will experience your content with unrivaled sound reproduction and plenty of headroom. On higher level recordings, the system can reach over 100 dB of output, staying totally under control while the clarity of the system delivers every nuance and detail of the music.



  • Highly efficient Class HD amplifier
  • Superior dynamics, volume, and impact
  • 60W x 4 RMS (Continuous / @ 4-ohms)
  • Huge power in a tiny package (600W RMS Total System Power)


  • Calibrated to deliver high-resolution audio upon plug in.
  • Extremely powerful 64 bit processing power and sound optimization
  • 295 MHz DSP Chip | Class HD Topology
  • Full Digital: Optical Toslink SPDIF Connectivity


  • Provides additional headroom, more effortless performance and added control by way of our Subwoofer gain control knob.
  • 360 Watts RMS (Continuous / @ 4-ohms)
  • Integrated all together in one assembly for ease of installation.


  •  Enables installation of the Signature Edition Amplifier Package while retaining the factory steering wheel control functions and maintaining the functionality of the factory CAN-Bus system
  • Set it and forget it: Installs seamlessly under the steering column


No splicing, no cutting, no guesswork.

All the essentials necessary have been taken into account to create a system that installs seamlessly without compromising the integrity of the vehicle. We engineered the installation to be seamless, intuitive and fun. Our Quick-Sync Wiring Harness is designed to ensure perfect connectivity, lengths, and ease of installation. Made with O.E. grade wire and connectors that meet or exceed the car manufacturers requirements resulting in immediate results and long-term reliability. 

Wrangler-Specific Subwoofer System.

The Signature Edition Subwoofer System delivers deep, accurate, and impactful bass as intended by the recording artist. You can expect full, and immersive low-frequency extension carrying all the emotional weight of your music, but without localization or compromising clarity. The Signature Edition 10" Subwoofer System accomplishes more moving mass, thus a very dynamic sound reproduction with plenty of range and an overall more bass response. 

We have taken into account all aspects of the factory audio system and designed the Signature Edition cabinet specifically for the Wrangler. Utilizing existing mounting locations to ensure a proper factory fit which allows full use of existing cargo area. This attention to detail ensures that there are no trade-offs to vehicle utility, no distracting rattles are introduced, all the while delivering superior bass response carrying the emotional weight of your music. 

  • 10″ Single Voice-Coil Subwoofer
  • 150W RMS (300 Peak)
  • Sensitivity 86.2dB (1 W,1M)
  • Frequency Response: 35 -500 Hz
  • 27-Liter sealed fiberglass cabinet 
  • Mounts using factory hardware locations
  • Non-invasive design preserves cargo area space
  • Dynamic range and an overall more immersive bass response.
  • Automotive connectors for precision and reliable connection

Signature Edition Speaker Upgrades

The Signature Edition Speakers deliver superior dynamics, blending and low-frequency response. Our speakers were honed out of a rigid performance criteria akin to how high-end audio loudspeakers are designed. We have the advantage of not only engineering our components for each other, but also specifically with the Jeep interior in mind. This results in seamless, full-range, detailed sound reproduction of instruments and voices without localizing the speakers - a trait commonly associated with fine high-end home audio speakers. Prepare yourself for bigger-than-life sound stage.

Tacoma Front 1" Soft Dome Tweeter installs plug and play using factory connectors and mounting - No modification, no guesswork. Tacoma speakers, tacoma dash speaker, tacoma tweeter, tacoma double cab,
  • Dramatically enhances music’s clarity and detail
  • Accurate fitment and superior acoustic reproduction.
  • Installs utilizing factory connector
  • Built-in 6db/Oct. High Pass Filter
  • Neodymium Magnet Structure
  • 4-ohms w/1.5kHz Resonance Frequency
  • 1st order in-line filter (8kHz) when matched w/ our 4" Full Range
Tacoma Front 6"x9" Woofer installs plug and play using factory connectors and mounting - No modification, no guesswork. Tacoma speakers, tacoma dash speaker, tacoma front woofer, tacoma double cab front speakers
  • 4-Inch wideband resulting in a seamless, transparent, and detailed reproduction of source material.
  • Optimized for factory Jeep vented speaker enclosures w/port tuned to 48Hz!
  • Designed to compliment our 1” Soft Dome Tweeter
  • Drop-In speaker replacement (same mounting + connector)
  • Fiber cone material for optimal performance
Questions? Contact our team by phone: 855-636-6346 or send a message below

We not only guarantee the quality and reliability of every O+ Solution, we are confident you will not find a better sound experience for the money.

Send us a message: