FREE SHIPPING!
ALL ORDERS OVER $1000!
LIMITED TIME OFFER, EXPIRES 2/29/24 | USE COUPON CODE:
O+LOVE
VALID ON INLAND US ORDERS ONLY | TERMS & CONDITIONS APPLY
Jeep JK Sound Solutions
The Jeep JK Sound Solutions are designed and tuned specifically for the 2007-2018 Jeep Wrangler (JK). This solution guarantees unmatched sound reproduction, seamless integration, and uncompromising reliability. You can expect unparalleled clarity, loudness, and deep bass response without impeding vocals when you plug in your Jeep Sound Solution.
*FOR OWNERS W/ ALPINE RESTYLE HEAD UNIT: Please reach out to [email protected] for more information.
Reference 500
- 56 Bit Multi-Channel DSP Amplifier
- Quick-Sync Wiring Harness
- Jeep JK Subwoofer System (10″)
- Dedicated Subwoofer Amplifier
- 6.5″ Component Front Speakers
- 6.5″ Coaxial Rear Speakers
- 1″ Soft Dome Tweeters
Installation Difficulty
-
Signature Edition for Factory Alpine Premium Audio
- 64 Bit Multi-Channel DSP Amplifier
- Quick-Sync Wiring Harness
- Jeep JK Subwoofer System (10″)
- Dedicated Subwoofer Amplifier
- 6.5″ Component Front Speakers
- 6.5″ Component Rear Speakers
- 1″ Soft Dome Tweeters
Installation Difficulty
-
Kit Contents
REFERENCE SERIES
- 56 Bit Multi-Channel, Class AB DSP Amplifier
- Class D Subwoofer Amplifier
- Quick-Sync Plug-n-Play Wiring Harness
- 6.5″ Component Front Speakers
- 6.5″ Coaxial Rear Speakers
- Vehicle-Specific 10-Inch Subwoofer
Specifications
REFERENCE SERIES
MULTI-CHANNEL DSP POWER AMPLIFIER
- 40W x 4 Continuous @ 2-ohms Output Power (1% THD)
- 56-Bit Digital Signal Processing
- Reverse Voltage Protection
- Under Voltage Detection to protect the vehicle battery
- Thermal Protection when exceeding 194° F
- ESD Protection (Electrostatic Discharge)
- OEM Audio + Proprietary Acoustic Tuning
- Meets all OEM Standards including AEC-Q100
- Powers and Remasters All Speakers
QUICK-SYNC WIRING HARNESS
- Maintains all factory functionality
- Constructed of genuine OEM connectors
- Fuse Holder Assembly is element proof & includes heat-shrink butt-connectors
JEEP WRANGLER (JK) SUBWOOFER SYSTEM
- 10″ 4-Ohms Subwoofer
- 0.7 cu. ft. Sealed Fiberglass Enclosure
- 150W RMS (300W Peak)
- Sensitivity 86.5dB (1 W,1M)
- F3 @ 41Hz (+3.4dB @ 65Hz)
- Blue Zinc Plated Woofer Mounting Hardware
- Black Powder Coated 14 GA Mild Steel Mounting Hardware
DEDICATED SUBWOOFER AMPLIFIER
- More Headroom + Low-Frequency Extension
- Up too 500W RMS
- Class D (95% efficient)
- Includes Remote Gain Control Knob for precision adjustability
OEM AUDIO + EDITION BLAM AUDIO FRONT COMPONENT SPEAKERS
- Cellulose Pulp Membrane
- Woofer: 6.5” (165 mm)
- 2 Ohm
- 60W RMS (120W Peak)
- Sensitivity: 94.3 dB
- Frequency Response: 60 Hz – 7 kHz
- Drop-in 3D Printed Mounting Hardware Included
- Plug-n-Play Speaker Connectors
- Year Model Specific Tweeter (specified 07-14 or 15-18)
OEM AUDIO + EDITION BLAM AUDIO REAR COAXIAL SPEAKERS
- Cellulose Pulp Membrane
- 165 mm (6.5”) Woofer
- 20mm Soft Dome Tweeter
- 2 Ohms
- 75W RMS (150W Peak)
- Sensitivity: 93 dB
- Frequency Response: 60 Hz – 20 kHz
- Drop-in 3D Printed Mounting Hardware Included
- Plug-n-Play Speaker Connectors
FRONT 20mm TWEETER
- Silk Soft Dome
- Neodymium Rare Earth Magnet
- Ferrofluid Cooled
- 3-Ohms
- 50W RMS (100W Peak)
- Sensitivity 90 dB (1W,1M)
- Frequency Response: 2,500-31,000 Hz
- Built-in 6db/Oct. High Pass Filter Included
Kit Contents
SIGNATURE SERIES
- 64 Bit Multi-Channel, Class GD DSP Amplifier
- Class D Subwoofer Amplifier
- Quick-Sync Plug-n-Play Wiring Harness
- 6.5″ Component Front Speakers
- 6.5″ Coaxial Rear Speakers
- Vehicle-Specific 10-Inch Subwoofer
Specifications
SIGNATURE SERIES
FOR FACTORY ALPINE PREMIUM AUDIO
SIGNATURE SERIES MULTI-CHANNEL POWER AMPLIFIER
- 65W x 6 @ 4-Ohms + 160W x 2 @ 2-Ohms Output Power (0.03% THD)
- 64-Bit Digital Signal Processing w/ 32-Bit CoProcessor
- Reverse Voltage Protection
- Under Voltage Detection to protect the vehicle battery
- Thermal Protection when exceeding 194° F
- ESD Protection (Electrostatic Discharge)
- OEM Audio + Proprietary Acoustic Tuning
- Meets all OEM Standards
- Powers and Remasters All Speakers
QUICK-SYNC WIRING HARNESS
- Maintains all factory functionality
- Constructed of genuine OEM connectors
- Fuse Holder Assembly is element proof & includes heat-shrink butt-connectors
JEEP WRANGLER (JK) SUBWOOFER SYSTEM
- 10″ 4-Ohms Subwoofer
- 0.7 cu. ft. Sealed Fiberglass Enclosure
- 150W RMS (300W Peak)
- Sensitivity 86.5dB (1 W,1M)
- F3 @ 41Hz (+3.4dB @ 65Hz)
- Blue Zinc Plated Woofer Mounting Hardware
- Black Powder Coated 14 GA Mild Steel Mounting Hardware
DEDICATED SUBWOOFER AMPLIFIER
- More Headroom + Low-Frequency Extension
- Up too 500W RMS
- Class D (95% efficient)
- Includes Remote Gain Control Knob for precision adjustability
OEM AUDIO + EDITION BLAM AUDIO FRONT & REAR COMPONENT SPEAKERS
- Cellulose Pulp Membrane
- Woofer: 6.5” (165 mm)
- 2 Ohm
- 60W RMS (120W Peak)
- Sensitivity: 94.3 dB
- Frequency Response: 60 Hz – 7 kHz
- Drop-in 3D Printed Mounting Hardware Included
- Plug-n-Play Speaker Connectors
- Year Model Specific Tweeter (specified 07-14 or 15-18)
20mm TWEETER
- Silk Soft Dome
- Neodymium Rare Earth Magnet
- Ferrofluid Cooled
- 3-Ohms
- 50W RMS (100W Peak)
- Sensitivity 90 dB (1W,1M)
- Frequency Response: 2,500-31,000 Hz
- Built-in 6db/Oct. High Pass Filter Included
Speakers
- OEM Audio + Editon Blam 6.5″ Component Speakers
- OEM Audio + Editon Blam 6.5″ Coaxial Speakers
- 1″ Soft Dome Tweeters
Subwoofer
- 10″ 4-Ohms Subwoofer
- 0.7 cu. ft. Sealed Fiberglass Enclosure
- 150W RMS (300W Peak)
- Sensitivity 86.5dB (1 W,1M)
- F3 @ 41Hz (+3.4dB @ 65Hz)
- Blue Zinc Plated Woofer Mounting Hardware
- Black Powder Coated 14 GA Mild Steel Mounting Hardware
Amplification
52-Bit & 64-Bit Digital Signal Processing
- Calibrated to deliver high-resolution audio upon plug in.
- Signature Series:
- 56-Bit Digital Signal Processing
- 65W x 6 @ 4-Ohms + 160W x 2 @ 2-Ohms Output Power (0.03% THD)
- Reference 500:
- 64-Bit Digital Signal Processing w/ 32-Bit CoProcessor
- 40W x 4 Continuous @ 2-ohms Output Power (1% THD)
It sounds unbelievable. Really what I was impressed with was the placement of the front stage. The vocals and the strings can clearly be pulled out of the music