2010-2024 Toyota 4Runner w/JBL Sound Solutions
IMPORTANT: FOR OWNERS OF MODEL YEARS 2010 to 2013. Party Mode can effect the quality of sound and therefore it is not recommended to engage Party Mode once the OEM Audio Plus system is installed.
FOR OWNERS WITH JBL AUDIO SYSTEMS ONLY (not base audio). The systems on this page are applicable only to vehicles WITH factory JBL audio.
Enhancement System
This O+ Sound Solution is for those 5th Generation (’10-24) Toyota 4Runner Limited owners with the JBL Audio package in their Truck. The GUARANTEED results are improved dynamics and clarity without introducing distracting characteristics (such as excessive bass/colored midrange and highs) to the current system.
The single subwoofer setup utilizes your factory JBL subwoofer enclosure, so it looks 100% stock, and you lose zero cargo space! The optional dual subwoofer is installed on the driver’s side of the vehicle.
Sound Enhancement
- Subwoofer System
- Dedicated Subwoofer Amplifier
- Plug-in Acoustic Correction
- Quick-Sync Wiring Harness
Installation Difficulty
-
Attention: Both options require you to remove your factory subwoofer (we can send instructions, it’s relatively simple) and send it in to us so we can retrofit it with an O+ Subwoofer.
Kit Includes
Enhancement Series Kit Includes:
- Quick-Sync Wiring Harness
- 4Runner-Specific Subwoofer System
- Dedicated Subwoofer Amplifier(s)
Evolution Series Kit Includes:
Evolution Series Multi-Channel DSP Power Amplifier
Integration Interface Module
Quick-Sync Wiring Harness w/ Optical Cable
4Runner-Specific Subwoofer System
Dedicated Subwoofer Amplifier(s)
Front 1″ Soft Dome Tweeters (2)
Front 6″ x 9″ Carbon Fiber Woofers (2)
Rear 6.5″ Carbon Fiber Woofers (2)
Hatch 6.5″ 2-Way Coaxial Carbon Fiber Woofers (2)
Specifications
ENHANCEMENT SERIES
QUICK-SYNC WIRING HARNESS
- Maintains all factory functionality
- Constructed of genuine OEM connectors
- Fuse Holder Assembly is element proof butt-connectors w/ built-in solder
- < 4lbs / 1.8kg
4RUNNER SUBWOOFER SYSTEM (Dual Optional)
- 8″ Quad Voice-Coil Subwoofer
- Genuine Carbon Fiber Cone Woofer
- 100W RMS (200 Peak)
- Sensitivity 88.9dB (1 W,1M)
- Frequency Response: 20 -1000 Hz
- Single Subwoofer utilizes factory sub enclosure (swap needed)
- Dual Subwoofer Installs on Driver Side
DEDICATED SUBWOOFER AMPLIFIER
- Adds More Headroom + Low-Frequency Extension
- 250 Watts RMS
- Class D (95% efficient)
- Includes Gain Control Knob for precision adjustability
- *Can be added in the future seamlessly
- Single subwoofer configurations receive a single sub amplifier
- Dual subwoofer configurations receive dual sub amplifiers
EVOLUTION SERIES
MULTI-CHANNEL 64-BIT DSP POWER AMPLIFIER
Powers & Remasters All Speakers + Subwoofer
390 Watts RMS (Continuous / @ 2-ohms)
2 x 55 – Front Tweeters
2 x 70 – Front Door 6 x 9
2 x 70 – Rear Door Woof + Tweeter
64-bit/295 MHz DSP Chip
Class HD topology
INTEGRATION INTERFACE MODULE
Enables installation of the Signature Edition Amplifier Package while retaining all factory JBL functionality.
QUICK-SYNC WIRING HARNESS
Maintains all factory functionality
Constructed of genuine OEM connectors
Fuse Holder Assembly is element proof butt-connectors w/ built-in solder
< 4lbs / 1.8kg
4RUNNER SUBWOOFER SYSTEM (Dual Optional)
8″ Quad Voice-Coil Subwoofer
Genuine Carbon Fiber Cone Woofer
100W RMS (200 Peak)
Sensitivity 88.9dB (1 W,1M)
Frequency Response: 20 -1000 Hz
Single Subwoofer utilizes factory sub enclosure (swap needed)
Dual Subwoofer Installs on Driver Side
DEDICATED SUBWOOFER AMPLIFIER
Adds More Headroom + Low-Frequency Extension
250 Watts RMS
Class D (95% efficient)
Includes Gain Control Knob for precision adjustability
*Can be added in the future seamlessly
Single subwoofer configurations receive a single sub amplifier (2 amps total, including DSP)
Dual subwoofer configurations receive dual sub amplifiers (3 amps total, including DSP)
FRONT 1″ SOFT DOME TWEETER
Silk soft dome
4-ohms
50W RMS (100 Peak)
Sensitivity 91.8 dB (1 W,1M)
Frequency Response: 3,000-20,000 Hz
Built-in 6db/Oct. High Pass Filter
Neodymium Magnet Structure
FRONT 6″ X 9″ WOOFER
Carbon Fiber Cone Woofer
2-ohms
50W RMS (100 Peak)
Sensitivity 90.2 dB (1 W,1M)
Frequency Response: 50-12,000 Hz
Neodymium Magnet Structure
REAR 6.5″ WOOFER
Carbon Fiber Cone Woofer
2-ohms
50W RMS (100 Peak)
Sensitivity 90.2 dB (1 W,1M)
Frequency Response: 55-20,000 Hz
REAR 1″ SOFT DOME TWEETER
Silk soft dome
4-ohms
50W RMS (100 Peak)
Sensitivity 91.8 dB (1 W,1M)
Frequency Response: 3,000-20,000 Hz
Built-in 6db/Oct. High Pass Filter
Neodymium Magnet Structure
Speakers
• Engineered for the perfect fit (drop-in installation)
• Cutting edge performance w/ carbon fiber cone & neodymium magnet
Subwoofer
- All the emotional weight of your music
- 14-liter sealed fiberglass cabinet
- Installs seamlessly using factory hardware locations
- Non-invasive design preserves all usable space
Amplification
• Superior dynamics, volume, and impact
• 360 Watts RMS (Continuous / @ 2-ohms)
64-Bit Digital Signal Processing
• You can expect seamless, full-range, detailed sound reproduction
• Extremely powerful 64 bit processing power and sound optimization
• 295 MHz DSP Chip | Class HD Topology
It sounds unbelievable.
Really what I was impressed with was the placement of the front stage.
The vocals and the strings can clearly be pulled out of the music